| Stron w wątku: [1 2] > | Copying tags in Studio 2011 Autor wątku: Yasutomo Kanazawa
|
|---|
Yasutomo Kanazawa 
Japonia
Local time: 09:09
Członek ProZ.com
od 2005
angielski > japoński
+ ...
Hello,
I'm presently working in Studio 2011, and I would like to know if there is a way to copy & paste tags in the source segment to target segment.
I know that this was possible in TagEditor, but I cannot find any way to do this in Studio.
Your input would be much appreciated.
| | | | Emanuela Galdelli
Włochy
Local time: 02:09
Członek ProZ.com
od 2003
francuski > włoski
+ ...
| Sure you can do it | Aug 8, 2012 |
Hi Yasotumo,
you simply have to do:
Control + Ins = Copy source to target
Alt + Shift + Ins = Copy all source to target
You can find the keys under: Translation.
Ciao from Rome,
Emanuela
| | | | Yasutomo Kanazawa
Japonia
Local time: 09:09
Członek ProZ.com
od 2005
angielski > japoński
+ ...
NOWY TEMAT
Ciao Emanuela,
Thanks for the great tip! It works.
Ciao from Tokio,
Yasutomo
| | | | Heinrich Pesch
Finlandia
Local time: 03:09
Członek ProZ.com
od 2003
fiński > niemiecki
+ ...
| And how about copying single tags? | Aug 8, 2012 |
I have had the same problem, when I had to use Studio. I looked through the list oft key combinations, but could not find an equivalent for copy first tag, move to next tag, move to previous tag (alt+cntrl+down, alt+cntrol+left, alt+cntrol+right, which are standard conmbinations in Tageditor, WFC and WFP).
| | |
|
|
|
Yasutomo Kanazawa
Japonia
Local time: 09:09
Członek ProZ.com
od 2005
angielski > japoński
+ ...
NOWY TEMAT | One more question | Aug 8, 2012 |
How do I copy and paste the tags in the correct (preferred) position into the target segment from the source?
When I try drag the tag(s) I want to copy, press "Format Paint" -> Copy Source Formatting, I can yes, paste the tag(s), it would be placed at the end of the sentence. How do I place this tag where I need it (ex. in the middle or at the beginning of the sentence) ?
| | | | Emma Goldsmith
Hiszpania
Local time: 02:09
Członek ProZ.com
od 2004
hiszpański > angielski
| Two ways to copy tags | Aug 8, 2012 |
Yasutomo Kanazawa wrote:
How do I copy and paste the tags in the correct (preferred) position into the target segment from the source?
Place the cursor in the desired place in the target segment and click Ctrl+comma. You'll get a drop-down list of all available tags (and placeables). Select the one you want with the arrow keys and click enter.
Another way to do it is to highlight the text you want to place within a tag pair in the target segment. Now move the mouse over to the source segment and press ctrl + left mouse click. the tag pair will be inserted around the highlighted text in the target.
HTH!
| | | | Yasutomo Kanazawa
Japonia
Local time: 09:09
Członek ProZ.com
od 2005
angielski > japoński
+ ...
NOWY TEMAT | Still doesn't work... :-( | Aug 8, 2012 |
Emma Goldsmith wrote: Yasutomo Kanazawa wrote:
How do I copy and paste the tags in the correct (preferred) position into the target segment from the source?
Place the cursor in the desired place in the target segment and click Ctrl+comma. You'll get a drop-down list of all available tags (and placeables). Select the one you want with the arrow keys and click enter. Another way to do it is to highlight the text you want to place within a tag pair in the target segment. Now move the mouse over to the source segment and press ctrl + left mouse click. the tag pair will be inserted around the highlighted text in the target. HTH!
Hello Emma,
Thank you very much for the tips, but for the first option, no drop-down list is displayed.
As to the second option, no tag pair would be inserted around the highlighted text in the target.
Am I missing something?
| | | | Extra Consult
Belgia
Local time: 02:09
Członek ProZ.com
od 2008
angielski
In Studio 2009, you can place tags in the target column by placing the cursor where you need to insert the tag, and then simply ctrl-leftclicking the tag in the source column.
No selecting or highlighting of text is required.
I'm guessing this would work for Studio 2011 as well.
Kind regards,
Geert
[Edited at 2012-08-08 13:56 GMT]
| | |
|
|
|
Emma Goldsmith
Hiszpania
Local time: 02:09
Członek ProZ.com
od 2004
hiszpański > angielski
Yasutomo Kanazawa wrote:
Am I missing something?
Maybe my explanations haven't been clear enough. In that case, I think you're best off reading how to do it in the Help.
F1 (help)
Search for "inserting tags".
| | | | Nora Diaz
Meksyk
Local time: 17:09
Członek ProZ.com
od 2002
angielski > hiszpański
+ ...
| You can choose your own shortcut | Aug 8, 2012 |
Even though Ctrl+Comma is simple and straightforward, like Heinrich points out, I was so used to Ctrl+Alt+Down, that I set that shortcut by going to Tools>Options>Keyboard Shortcuts>Editor, then choosing QuickPlace from the right-hand menu.
To place tags in segments, it's like Emma has explained, place the cursor where you want your tag, then use your keyboard shortcut. All the tags in the segment are displayed and you can choose the one you want. If there are several, each time you... See more Even though Ctrl+Comma is simple and straightforward, like Heinrich points out, I was so used to Ctrl+Alt+Down, that I set that shortcut by going to Tools>Options>Keyboard Shortcuts>Editor, then choosing QuickPlace from the right-hand menu.
To place tags in segments, it's like Emma has explained, place the cursor where you want your tag, then use your keyboard shortcut. All the tags in the segment are displayed and you can choose the one you want. If there are several, each time you press your shortcut, the next tag is displayed, and you can see it being highlighted on the source text.
If there are formatting tags, for example, bold, italic, rather than just placing the cursor in the position of the first tag, it's better to select the text the formatting will be applied to, then use the shortcut, this will place both the opening and closing tags around the appropriate text. ▲ Collapse
| | | | Nora Diaz
Meksyk
Local time: 17:09
Członek ProZ.com
od 2002
angielski > hiszpański
+ ...
| Which CAT tool are you using? | Aug 8, 2012 |
When I try drag the tag(s) I want to copy, press "Format Paint" -> Copy Source Formatting, I can yes, paste the tag(s), it would be placed at the end of the sentence. How do I place this tag where I need it (ex. in the middle or at the beginning of the sentence) ?
By the way, after re-reading this part of your question, I'm wondering if you're really using Studio. "Format Paint" sounds like SDLX to me.
| | | | Yasutomo Kanazawa
Japonia
Local time: 09:09
Członek ProZ.com
od 2005
angielski > japoński
+ ...
NOWY TEMAT | SDL Edit Document | Aug 8, 2012 |
Nora Diaz wrote: When I try drag the tag(s) I want to copy, press "Format Paint" -> Copy Source Formatting, I can yes, paste the tag(s), it would be placed at the end of the sentence. How do I place this tag where I need it (ex. in the middle or at the beginning of the sentence) ?
By the way, after re-reading this part of your question, I'm wondering if you're really using Studio. "Format Paint" sounds like SDLX to me.
I'm working on a SDL Edit document (that's what the property says). It's an itd file. Sorry for my ignorance, but is this SDL or SDLX?
| | |
|
|
|
Nora Diaz
Meksyk
Local time: 17:09
Członek ProZ.com
od 2002
angielski > hiszpański
+ ...
| What are you using to translate your ITD file? | Aug 8, 2012 |
An ITD file is an SDLX file, but it can also be processed in Studio.
The question is, are you using SDL Edit (SDLX) to translate it or are you using SDL Trados Studio? Look at the top left corner of your window to see what the program name is.
Also, if you have a menu called "Format Paint", that's SDLX, not Studio, and therefore the suggestions offered here would not work.
I would think SDLX opened the file if you double-clicked on it. Try opening Studio fi... See more An ITD file is an SDLX file, but it can also be processed in Studio.
The question is, are you using SDL Edit (SDLX) to translate it or are you using SDL Trados Studio? Look at the top left corner of your window to see what the program name is.
Also, if you have a menu called "Format Paint", that's SDLX, not Studio, and therefore the suggestions offered here would not work.
I would think SDLX opened the file if you double-clicked on it. Try opening Studio first, then opening your file from within Studio in order to translate your ITD file in Studio.
[Edited at 2012-08-08 17:26 GMT] ▲ Collapse
| | | | Yasutomo Kanazawa
Japonia
Local time: 09:09
Członek ProZ.com
od 2005
angielski > japoński
+ ...
NOWY TEMAT
Nora Diaz wrote:
An ITD file is an SDLX file, but it can also be processed in Studio.
The question is, are you using SDL Edit (SDLX) to translate it or are you using SDL Trados Studio? Look at the top left corner of your window to see what the program name is.
Also, if you have a menu called "Format Paint", that's SDLX, not Studio, and therefore the suggestions offered here would not work.
I would think SDLX opened the file if you double-clicked on it. Try opening Studio first, then opening your file from within Studio in order to translate your ITD file in Studio.
[Edited at 2012-08-08 17:26 GMT]
Hello Nora,
Maybe you're right that I am working on a SDLX file, since it says SDL Edit at the top left corner when I open the file by double-clicking on it. And there's also the "Format Paint" feature. I'm so ashamed that I couldn't tell the difference between Studio and SDLX.
Would you be kind enough to give me some tips on how to copy and paste tags in the source to the target segment?
| | | | pjg111
Local time: 02:09
angielski > francuski
| It's possible to work on ITD files from within Trados Studio 2011 | Aug 9, 2012 |
Yasutomo Kanazawa wrote: Nora Diaz wrote:
An ITD file is an SDLX file, but it can also be processed in Studio.
The question is, are you using SDL Edit (SDLX) to translate it or are you using SDL Trados Studio? Look at the top left corner of your window to see what the program name is.
Also, if you have a menu called "Format Paint", that's SDLX, not Studio, and therefore the suggestions offered here would not work.
I would think SDLX opened the file if you double-clicked on it. Try opening Studio first, then opening your file from within Studio in order to translate your ITD file in Studio.
[Edited at 2012-08-08 17:26 GMT] Hello Nora, Maybe you're right that I am working on a SDLX file, since it says SDL Edit at the top left corner when I open the file by double-clicking on it. And there's also the "Format Paint" feature. I'm so ashamed that I couldn't tell the difference between Studio and SDLX. Would you be kind enough to give me some tips on how to copy and paste tags in the source to the target segment?
Hi Yasutomo,
You can quite well work on ITD files from within Trados Studio 2011. Hence you can use Trados Studio 2011 features to handle tags. ITD files can be smoothly exported from Trados Studio 2011. I can assure you it works very well. I often have large sets of ITD files to translate and check in to SDL servers and it works as a charm!
Now if you feel more comfortable using SDLX or SDL Edit, you can copy tags but only after entering Paint mode (Ctrl+F9). Check the online help for more details.
HTH.
Cheers.
Patrick
| | | | | Stron w wątku: [1 2] > | To report site rules violations or get help, contact a site moderator: You can also contact site staff by submitting a support request » Copying tags in Studio 2011 | Anycount & Translation Office 3000 | Translation Office 3000
Translation Office 3000 is an advanced accounting tool for freelance translators and small agencies. TO3000 easily and seamlessly integrates with the business life of professional freelance translators.
More info » |
| | TM-Town | Manage your TMs and Terms ... and boost your translation business
Are you ready for something fresh in the industry? TM-Town is a unique new site for you -- the freelance translator -- to store, manage and share translation memories (TMs) and glossaries...and potentially meet new clients on the basis of your prior work.
More info » |
|
| | | | X Sign in to your ProZ.com account... | | | | | |
Login to reply/comment 
Translation news related to SDL Trados
